Skip to Content
  1. All products
  2. QuinLED
  3. QuinLED Diff-Adv
  4. QuinLED
Pricelist: Default CAD pricelist Pricelist
Pricelist: Default CAD pricelist Pricelist

QuinLED Diff-Adv

(0 review)

Designed for extended distances between a QuinLED controller and LED setup, the QuinLED Diff-Adv is the perfect solution for more complex installations.

QuinLED Diff-Adv, a step up of the previously introduced Diff-Solo, offers a more advanced system to send your LED data signals over long distances. Instead of sending a single LED data signal via UTP it is able to send up to 4 data signals over the same UTP connection. 

To provide highest flexibility of the LED Data signal distribution the receiver boards are designed as "midpoint" boards which allows them to be "daisy chained" and configured based on your choice of output. You can even choose to duplicate the same LED data signal to multiple points.

quinled
$ 16.99 $ 16.99
$ 16.99

$ 0.00 / Units
  • Diff-Adv
Add to cart
Add to wishlist
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Contact Us

At a glance

4 independent signals

Send up to 4 LED data signals over a single UTP cable

Up to 500m (1800ft)

Long-distance runs between controller and LEDs over standard UTP

Daisy-chainable midpoints

Chain Receiver-Midpoint boards and configure each output individually

5V-48V input

Auto-sensing voltage on both Sender-4 and Receiver-Midpoint boards

Built-in fusing

Receiver-Midpoint boards include fusing with a broken fuse indicator

Level-shifted output

5V data signal with 33Ω resistor on every LED channel

Sender-4 required, 1x
  • Converts up to 4 independent LED data inputs to a differential RS-485 signal
  • 6-pole 5.08mm rising clamp screw terminals (VCC, GND, 4x data), up to 14AWG with ferrule
  • 3.3V or 5V data signal logic compatible
  • 5V-48V auto-sensing input voltage
  • Current draw: 400mA@5V / 250mA@12V / 150mA@24V / 75mA@48V
  • RJ45 socket output, includes pluggable terminator for daisy-chaining
  • White PCB, 4x M3 mounting holes
Receiver-Midpoint-1
  • Single LED data output, selectable via 4-position switch
  • 5V-48V auto-sensing input voltage
  • Current draw: ~20mA@5V / 12mA@12V / 6mA@24V / 3mA@48V
  • 2-pole power input + 3-pole LED output, 5.08mm screw terminals (14AWG w/ ferrule)
  • 2x RJ45 sockets (in + daisy-chain out) & pluggable end-of-chain terminator
  • Level-shifted 5V output, 33Ω resistor
  • 5A fuse (10A max), broken fuse indicator, blue PCB, 4x M3 holes
Receiver-Midpoint-2
  • 2 independent LED data outputs, selectable via 4-position switch array
  • 5V-48V auto-sensing input voltage
  • Current draw: ~30mA@5V / 16mA@12V / 10mA@24V / 6mA@48V
  • 2-pole 9.5mm barrier power input (10AWG fork crimp)
  • 2x 4-pole 6.35mm LED VCC/GND terminals + 1x 2-pole 5.08mm data terminal
  • 2x RJ45 sockets (in + daisy-chain out), level-shifted 5V output w/ 33Ω resistor
  • Built-in power distribution, per-channel broken fuse indicator, ships with 2x10A or 2x5A fuses
Example wiring configurations
Sender-4 with a single Receiver-Midpoint board
Sender-4 with two single-output Receiver-Midpoint boards
Sender-4 with one single and one double-output Receiver-Midpoint board
Two Sender-4 boards paired with a Dig-Octa

See the full wiring guide for more configurations.

Some links are affiliate links and we may earn a small commission when you purchase through the link — your price does not change and it doesn't affect any deals or coupons either.

Power supply & fuses

We always suggest Meanwell power supplies — very reliable, and they actually give you the power they state. Handy to keep spare fuses on hand too.

Meanwell power supply, recommended for powering this board
Meanwell Power Supply

Reliable, and actually delivers the power it states.

View on Amazon
ATO fuses, spares for your install
ATO Fuses

Handy to have spares in case you mis-wire or blow the included fuse.

View on Amazon
ATO fuses, alternate assortment
ATO Fuses (Assortment)

A mixed-amperage assortment, handy if you're running multiple Receiver-Midpoint boards.

View on Amazon
Misc. accessories

We sell a variety of accessories to help with your install and make water-tight connections.

Self-Closing Braided Split Loom
Split Braided Loom

Self-closing braided loom for tidy, protected cable runs. Available in multiple sizes.

Shop Split Loom
Dual Wall Adhesive Lined Heat Shrink
Adhesive Lined Heat Shrink

Dual-wall, adhesive-lined heat shrink for water-tight connections. Available in multiple sizes.

Shop Heat Shrink

More from the QuinLED lineup

See all
QuinLED Diff-Solo

QuinLED Diff-Solo

Only need 1 signal? Simpler 1:1 alternative — $20.99
QuinLED Dig-Octa Brainboard 32-8L

Dig-Octa Brainboard 32-8L

Feed it up to 4 signals via 2x Sender-4 — $51.99
QuinLED Dig-Quad v3 Digital LED Controller

QuinLED Dig-Quad v3

4 outputs, a natural match for the Sender-4 — $55.99